LOW LOADER.
The all round machine mover.
HMLL - RANGE
HMLL 276 - HMLL 186 - HMLL 183 - HMLL 133
HMLL 336
6334mm (20ft 9in) Bed length
1625mm (5ft 4in) Beaver tail
9610mm (31ft 6in) Overall length
2500mm (8ft 2in) Max width
9.5deg Beaver tail angle
860mm (2ft 9in) Ride height
27T Carrying capacity
Keruing timber floor
250 x 150 Box chassis
180 x 75mm Channel side rails
3 x 90mm Square axles
300 x 90 Ag speed axles
HMLL 276
6334mm (20ft 9in) Bed length
1625mm (5ft 4in) Beaver tail
9610mm (31ft 6in) Overall length
2500mm (8ft 2in) Max width
9.5deg Beaver tail angle
860mm (2ft 9in) Ride height
22T Carrying capacity
Keruing timber floor
250 x 150 Box chassis
150 x 75mm Channel side rails
3 x 90mm Square axles
300 x 90 Ag speed axles
HMLL 186
6100mm (18ft 9in) Bed length
1625mm (5ft 4in) Beaver tail
9000mm (29ft 6in) Overall length
2500mm (8ft 2in) Max width
9.5deg Beaver tail angle
860mm (2ft 9in) Ride height
15T Carrying capacity
Keruing timber floor
250 x 150 Box chassis
150 x 75mm Channel side rails
2 x 90mm Square axles
300 x 90 Ag speed axles
HMLL 183
4500mm (14ft 9in) Bed length
1250mm (4ft 1in) Beaver tail
7500mm (24ft 7in) Overall length
2500mm (8ft 2in) Max width
12.5deg Beaver tail angle
860mm (2ft 9in) Ride height
15T Carrying capacity
Keruing timber floor
250 x 150 Box chassis
150 x 75mm Channel side rails
2 x 90mm Square axles
300 x 90 Ag speed axles
HMLL 133
4500mm (14ft 9in) Bed length
1250mm (4ft 1in) Beaver tail
7500mm (24ft 7in) Overall length
2500mm (8ft 2in) Max width
12.5deg Beaver tail angle
860mm (2ft 9in) Ride height
10T Carrying capacity
Keruing timber floor
310 x 127mm I-beam chassis
150 x 75mm Channel side rails
2 x 80mm Square axles
300 x 90 Ag speed axles
All of our trailers are shot blasted prior to painting, followed by 2 pack epoxy primer & 2 pack polyurethane top coat.
STANDARD SPEC
Sprung compensating axles
Hydraulic brakes
L.E.D lights
Side reflectors
Hydraulic pipe work
1ft Headboard
Wheel nut indicators
Hard wood floor
215/75 R 17.5 twin wheels
Rope hooks / Chain points
Handbrake
OPTIONAL EXTRAS
High speed axles (per axle)
Air/oil twin line braking
ABS with air brakes
Hydraulic load sensing valve
Mud flaps
Flashing beacon
Adjustable sprung drawbar
Side lockable toolbox (steel)
Side lockable toolbox (plastic)
Hydraulic ramps
Hydraulic rear jack legs
Rear hydraulic spool block
Moveable ramps
Aluminum removable ramps
Side boards (on top of the bed)
side rails (lower)
Side marker lights (compulsory for trailers over 9m)
Bale Rake
Bale wedge (heavy duty)
Ratchet Strap rail (under bed)
Heavy duty lashing points
4 retractable load locks
Varying floor types
Alterations to std. body sizes
Manual outriggers
Demountable water tanks
Custom colour
Turntable (wheel dependent)
Passive steering axle
Forced steering rear axle incl steering control
Central Tyre inflation
Full selection of wheels & tyres
.
Prices & Spec Comparison
View & download snippets from our 2022 brochure or the whole document.
ABOUT
CHASSIS
Our low loaders are built with 355 grade rectangular hollow section chassis rails running the full length of the trailer, with ribs running over them. The ribs run the full width of the trailer and are welded to the chassis and the side rails. This extra strength at the side rails enables wide loads to be carried. This woven structure forms a very strong chassis on which our low loaders are based.
RUNNING GEAR
Standard running gear for the trailers are heavy duty agricultural axles with all wheel hydraulic braking. An option to upgrade to high speed running gear with an oil / air braking system is available. All low loaders are fitted with new 215/75 R 17.5 8 stud twin wheels, however, other options with increased ride height are available on request, including small flotation wheels as well as 435/50 R 19.5 super singles.
RAMPS
Our ramps are made from 3 lengths of 150 x 75 x 6mm folded section per ramp, covered by steel plate. They have cross runners on them to aid grip, this makes a very strong and long lasting ramp. The ramps are designed to accommodate any track of vehicle, with narrow tracked vehicles using only one ramp.
ADDITIONAL INFORMATION
Our trailers have numerous tying points for both rope and ratchets, with additional strong chain securing points over the axles where heavier loads should be secured, such as heavy plant. Additional point or specialist securing points can be added on request.
STANDARD BUILD
The floor is made of 25mm hardwood as standard, allowing damaged sections to be replaced easily. Chequer plate is also an option and available on request.